Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet It does not include LED indicators or key fobs and is hidden in the vehicle's wiring.
The user can also deactivate the system for a short period of time by using Transport Mode when renting their vehicle. This guide will walk you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system connects directly to your vehicle's ECU and is secured by a unique PIN code that you can choose. It's inaccessible to thieves using diagnostic scanners or other modern methods, and is unable to be disabled by circuit cuts.
The system is easy to use, but it is essential to have a an expert installation to ensure a secure and secure connection to your vehicle's ECU. Installers approved by Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's protection package.
To prevent car immobiliser ghost of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once this is done the installer is able to safely begin work. Hand tools are the most basic to be used to ensure precise connections. A multimeter is useful to check electrical values. Cable ties and insulation tape are also necessary for securing connections and keeping wiring tidy. In addition, the user's manual provides specific guidance specifically tailored to your Ghost Immobiliser model.
During the installation process, it's important to choose a grounding point that's free of debris and paint. Installers should also make sure that the immobiliser's wires CAN H & can L are connected to the appropriate ECU ports. The wires can be connected or soldered, depending on the model. Using a quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the customer once the installation is completed. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. To accomplish this, the customer must press the button for service on the dashboard five times in a matter of 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's an excellent option for anyone who regularly rents out their vehicles on platforms like Turo. An immobiliser can cut down on insurance costs, since it lowers the chance of theft.
Getting Started
It's not difficult to come up using an autowatch immobiliser in order to guard your vehicle from theft. It protects your vehicle from being started even when a criminal steals or copies the key. This is due to its high-tech technology that is designed to stop the engine from running without the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN which allows direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence, which only you know. This makes it impossible for anyone else to start your car. This is the most secure way to protect your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a ghost ignition is a simple process, but it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you must locate and identify a constant 12V power source and an adequate grounding point on the vehicle's chassis. Then, you can start connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a secure connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent electrical short circuits.
Once the wires have been connected, you can plug in the battery and start the engine to determine whether the immobiliser works. Once you have verified that everything is working correctly and you are satisfied, you can place the immobiliser in a safe place inside the vehicle. Be sure to conceal it in a secure manner so that thieves can't tamper with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car thieves. It offers superior protection against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. The device is simple to use, and it can be set up to the service valet setting to ensure that your vehicle will not be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. The system does not send or receive radio frequency signals and instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter your disarm sequence (either two or one buttons) and turn on the ignition in your car to activate the Ghost Immobiliser. browse this site will flash twice to confirm that you have entered the correct code. Now you can begin driving your car in a safe manner.
Once installed, Ghost Immobiliser safeguards your vehicle against key cloning or hacking while preserving its value. If you ever need to surrender your car to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need find the source of power that is constant (12V) and an earthing point. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by potential thieves. Be sure to check the exact position of these points to avoid making mistakes, and mark them with the help of tape or a label. It's also a good idea to check all connections for signs of wear and tear. Make sure all connections are firmly in place, and properly protected. Don't forget to test the Ghost Immobiliser after the installation is completed. This will ensure that the unit functions properly and that all connections are secure and insulated. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your vehicle's ECU to prevent the motor from starting without authorization. Its cutting-edge technology safeguards your vehicle from key cloning, hacking, and other methods that thieves employ to steal cars. The Ghost is a perfect complement to existing tracking and alarm systems to provide the most effective protection for your vehicle. The Ghost's unparalleled features, coupled with its discreet design, make it a popular choice for car enthusiasts as well as security-conscious drivers.
It is important to follow the steps of installation to ensure a complete integration of the Ghost Immobiliser. Consult the wiring diagram of your vehicle as it will help you locate and connect the wires. After that, you'll need identify the power source as well as grounding points. Once these are found then you'll need to mark them so that they are easy to locate when installing. In addition, it is essential to use high-quality tools and materials. Basic hand tools can assist in making connections that are precise, while a multimeter will confirm electrical values and guarantee security. Cable ties and insulation tape can help keep connections tidy and neat. Finally, a user manual will provide specific guidance tailored to your Ghost model.
Before beginning the installation it is important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser works as intended and will stop vehicle starts that are not authorized. This step should be done regularly as part your regular inspections of the vehicle to ensure that the system is always working correctly.
Once the installation is complete Once the installation is complete, you can drive your car with confidence. The Ghost will guard your car from thieves who might steal your car. It will ensure that no one is able to escape with your car without having the correct PIN code. The Ghost can also be paired with a tracker that is approved by Thatcham to identify any attempts to steal or tamper and allow you to track your vehicle if it is stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with all major brands. If you are interested in protecting your car with this innovative device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which ensures that we adhere to strict standards for installing our products. This assures customers, insurance companies and law enforcement officials that all installations are completed safely and in a correct manner.